The Aesthetics of Accordion Security Gates: Design Options

Most people don’t think of security gates until they need one. Then the conversation turns fast from abstract safety to how that gate will look in the storefront window where you sell espresso and soft cardigans, or in the industrial dock where you move pallets before sunrise. Accordion security gates sit at an odd intersection of architecture, display, and deterrence. They are as much furniture as fence. When you get the design right, they fade into the background by day and take center stage at night, projecting order without shouting.

I have specified, installed, and lived with more expanding security gates than I care to admit. Retail, restaurants, clinics, galleries, even a dog bakery. The lesson across them all: form matters as much as function. Not for vanity, but for behavior. A neat, intentional gate gets respected. A clunky one invites workarounds, prop kicks, and the occasional coat hanger through the lattice. Let’s talk about the design options that shape how accordion security gates look, work, and age, from finish and pattern to guide tracks and visible hardware.

The visual language of scissor patterns

The distinctive X-pattern that gives scissor security gates their name is more than mechanical geometry. The diamond formed where those arms intersect is the first thing customers see after hours. Smaller diamonds read as refined, like a jewelry display’s grillwork. Larger diamonds suggest industrial strength and are often cheaper to produce. Neither is automatically better. It depends on the storefront and on what you want to telegraph to people walking by.

Smaller patterns, often around 3 to 4 inches at their widest point, allow better object containment. If you run a pharmacy or sell small electronics, that tighter lattice helps block reach-through attempts. A tighter pattern also casts a delicate shadow, which sounds romantic until you try to clean it. Dust clings to every intersection. If you hate ladders, keep that in mind.

Larger patterns, in the 6 to 8 inch range, feel airier and show off your merchandise after hours. They give strong sightlines, which matters for window-shopping and for your nighttime patrols. People see movement inside, and most importantly, potential intruders know they can be seen. The trade-off is the reach-through factor. If your gate stands an inch or two off the glazing, a large diamond can invite fishing expeditions aimed at door handles or inventory hooks. Your security gate supplier should ask about these specifics and offer add-ons like rear push plates or handle shields if you need them.

One more subtlety: the angle of the scissor arms influences the visual rhythm. Steeper arms create tall, narrow diamonds that echo mullions and draw the eye up. Flatter arms create squatter shapes and a more horizontal feel. If your façade already has strong vertical lines, I usually echo that with a steeper scissor, so the gate reads like part of the architecture rather than an afterthought.

Tracks, no tracks, and everything in between

A security gate that looks slick but drags like a bad shopping cart will quickly be left open or tied back https://andrewwve766.wpsuo.com/scissor-security-gates-for-schools-and-community-centers halfway. That defeats the point. You have three main options for guidance: top hung with a bottom guide pin, top hung with a recessed floor track, and full top-and-bottom tracks that keep the gate ruler straight. Each changes the look, especially at night.

Top hung with a guide pin is the least visually intrusive for a retail environment. You get a clean floor, no trip hazard, and the bottom of the gate lightly kisses a stainless pin socket in the evening. By day, all anyone sees is a small hole or a flush socket. It’s elegant indoors and in malls where housekeeping will glare at any floor obstruction. The downside shows up with wider spans. Over 12 to 14 feet, even a well-made gate will start to deflect, so you might see a gentle sway that, while fine for security, looks messy to a designer’s eye.

A recessed floor track adds discipline. The bottom carriers stay aligned, which preserves the geometry so the lattice appears symmetric, panel to panel. If the tracks are set flush and kept clean, this is the most invisible option during the day. In older buildings, cutting a channel into terrazzo or heritage hardwood is a non-starter, so I often propose a flat surface-mounted track anodized to match the storefront. The trick is to choose a profile low enough not to catch heels or pallet jacks. Once installed, you’ll barely notice it.

Full tracks top and bottom look purposeful, even industrial. For commercial security gates in warehouses, loading docks, and schools, it’s the right visual tone. You can span 20 to 40 feet with intermediate pickets, and the lines stay straight. Painted or galvanized steel tracks telegraph durability. If your brand leans raw and utilitarian, this can be an aesthetic choice rather than a compromise.

Finish isn’t an afterthought

Color is the simplest design lever and the easiest way to swing the gate from “security gear” to “part of the store.” Standard finishes tend to be black, white, or a durable gray. Black disappears against tinted glass, and it flatters almost everything from butcher tile to brick. White reads clean in clinics and boutiques but shows fingerprints, especially on the handle posts. The gray family, particularly in a fine-texture powder coat, hides dust wonderfully and takes abuse without looking tired.

Custom colors open up brand alignment, though the paint system matters. A good polyester powder coat delivers a hard shell that resists chipping, while an epoxy powder resists chemicals in harsher environments but can chalk under UV. For outdoor accordion security gates, I specify a super-durable polyester powder, 60 to 80 microns thick. You can go wild with color, but consider how the gate looks at night when it is the only thing customers see. A bright red gate outside a wine shop felt jaunty on install day. By month two, all anyone saw after hours was a red fence. The wine disappeared behind it.

Metal showing through is a design choice some clients love. Hot-dip galvanized steel with a light clear coat has an honest, infrastructure look. It also comes with texture. Galvanizing leaves a crystalline pattern called “spangle,” which catches light in a way powder coat does not. In contemporary interiors with exposed conduit and polished concrete, it lands beautifully.

Sightlines, glass, and the illusion of openness

Accordion security gates win points for transparency. Compared to shutters or roll-down grilles, you keep your display visible and your lighting scheme intact. A fast mental test I use: stand across the street and squint. If you can still read the storefront signature through the gate, you’re likely balancing security with brand.

Deep window bays create a staging area. Set the gate close to the glass and you get the tightest barrier, at the cost of reflections and fingerprints. Pull the gate back to the inside edge of the display, and you create a lit diorama at night that can be stunning. I’ve done this with gallery clients who wanted their art to glow after hours without inviting hands on the canvases. The lattice framed the work, and the transparency told passersby that the space was alive, not shuttered.

A mistake I see often: installing a glossy white gate in front of clear glass backed by glossy white display panels. Under LED spots, the gate disappears by day but blares at night. Your eye catches specular highlights on every bar. Breaking up the background with a matte paint or a wood backdrop softens the effect and keeps the gate’s presence proportional.

Handles, locks, and the small jewelry of hardware

Hardware is where aesthetics and usability shake hands. On expanding security gates, the locking stile, handles, and hasps can look like a mess of metal unless you choose well. For narrow storefronts, I prefer a narrow-profile lock post with a built-in cylinder rather than a padlock hasp. A cylinder set keeps the lines clean and removes the temptation to hang a giant brass padlock like a door knocker. If you must use padlocks for key control across multiple shifts, go for a shrouded design that doesn’t dangle in view.

Slide bolts at the top and bottom are effective and fast, but they need a place to land. When they shoot into the ceiling or floor, you get small alignment plates that can be made to look tidy. Ask your security gate supplier to match plate finishes to nearby metalwork. Small choices like rounded corners and countersunk screws read as intentional.

For customers who want the gate to disappear by day, recessed pull cups sit flush, while thin strap handles give enough purchase without shouting. Replacing shiny zinc hardware with satin stainless or black oxide finishes helps everything blend. I avoid polished chrome unless the interior palette already leans that direction.

Folding behavior is a design element

How a gate stacks is as much an aesthetic question as a practical one. When open, the stack sits like a vertical accordion on one side, sometimes both. That stack can cover signage, block a display niche, or bump into a fire pull if you don’t plan the pocket. You also get a density of metal that changes the sightline right where you want openness.

A single-sided stack keeps things simple. If the span is long, splitting the stack to both sides reduces the depth. On a 16 foot opening with a standard 1.5 inch lattice pitch, the stack can easily hit 15 to 18 inches deep. You can hide this in a shallow millwork pocket with a flap door. Paint that pocket’s interior the same color as the gate, and the visual weight goes away.

Pay attention to overhead space. A top-hung gate needs a structural header and a track. If your ceiling features decorative coffers or pendant lights, aligning the track with a recess keeps the visual noise down. I’ve tucked tracks into shadow gaps above clerestory glass, leaving the field of the ceiling clean.

Lighting, shadow, and the theater of closing time

At night, your gate is part of your lighting design whether you want it to be or not. The lattice casts shadows that can be charming or chaotic depending on the angle and color temperature of your fixtures. Warm light softens the vibe and flatter skin tones, which is why hospitality leans that direction. Retail often uses cool, punchy light to make product pop. Through a gate, cooler light creates higher contrast shadows and a slightly more clinical feel.

If the goal is to keep the store feeling open while signaling “no entry,” place a low wash at the baseboard behind the gate and keep the main ceiling lights off. The glow reads as intentional, and the lattice pattern becomes a gentle signal rather than a barrier screaming you out. On the other hand, if your location demands obvious, hard boundaries, turn on your perimeter lights so the gate stands crisp and unmistakable.

For exterior gates, pay attention to nearby streetlights. Sodium lamps make galvanized steel look jaundiced. LED streetlight retrofits lean cool blue, which will amplify any imperfections in paint. When we did expanding security gates in Kelowna’s downtown, we tested a small painted sample under the actual streetlight at 11 pm before signing off. Saved a repaint.

Materials and their personalities

Most accordion security gates you’ll encounter are steel. Steel carries weight and confidence, it welds clean, and with the right finish, it takes a beating. Aluminum versions exist and have their place in marine environments and for lighter duty where the substrate cannot bear as much load. Aluminum dents easier, but it will not rust, so the calculus shifts if your gate is near deicing salts or ocean spray.

For interiors, I usually pick steel with a powder coat, because the tactile feeling is more substantial. The pickets remain straight over time, and the hinge points, if properly bushed, stay whisper quiet. If you’re going to open and close the gate twice a day for years, that tactile quality adds up. You can hear the difference between crisp carriers and sloppy ones, and customers can too, even if they don’t know what they’re hearing.

If you specify aluminum, tell your supplier you care about play at the joints. Oversize rivets and tight tolerances keep chatter down. Anodized aluminum in a bronze tone can look upscale in mid-century or hospitality spaces, and it pairs well with walnut and smoked glass.

Brand voice without a billboard

Security gates for business locations communicate a message after hours. The message may be friendly order, steely determination, or don’t even try it. The trick is to align that message with your brand without putting your logo on a fence. Consider a subtle powder coat that echoes your accent color, or a gate whose lattice proportion mirrors your product display shelves. If you run a minimalist studio, a slim black svelte gate sets the right tone. For a bike shop, I once specified a textured graphite finish and a slightly larger diamond that echoed the triangle in a bike frame. Customers noticed without knowing why.

There are also ways to integrate small signs without clutter, like a tasteful engraved panel at the lock post with operating hours or an emergency number. Avoid taped paper signs. They cheapen the entire aesthetic, no matter how beautiful the gate.

Noise, touch, and the choreography of closing

A gate that opens like butter and closes with a decisive click reduces closing-time friction. Staff treat it better, customers don’t flinch, and you won’t have to scold anyone about slamming. Wheels matter. Nylon-tired carriers on a smooth aluminum track glide quietly. Steel-on-steel carriers make your space sound like a warehouse, which may be perfect for a loading dock but wrong for a spa. Ask for sealed bearings and, if the environment is dusty, caps on the carriers to keep grit out.

Handles should feel sturdy and warm to the hand. Bare metal in winter bites. A slim molded grip or a leather wrap softens the touch and, oddly enough, encourages staff to use the handle rather than tug the lattice. Over time, that saves on bent pickets and misaligned arms.

Architect, installer, supplier: the three-legged stool

You can sketch the perfect gate, and it will still disappoint if installation is sloppy. Headers must be plumb, tracks level, and lock keeps aligned to within a few millimeters. On a long run, a half-degree of slope becomes a scraped floor or a fight at closing. Your security gate supplier should measure twice, confirm substrate, and bring the right fasteners for concrete, steel, or wood. If you hear the words “we’ll make it work” at site visit, pause.

Allow time for shop drawings, even on simple jobs. This is where you resolve where the stack lands, what the lock meets, and how the gate clears existing alarm contacts. In older brick buildings, shim the top track so the lattice doesn’t scuff the brick when it flexes. In malls, confirm with management what finishes are allowed. Some require track colors to match the overall storefront palette. Others insist on white, no exceptions. Better to know before the powder coat bakes.

Use cases, contrasted

A pharmacy in a busy neighborhood chooses a tight 3 inch diamond, top-and-bottom tracks, satin gray powder coat, and a keyed cylinder with concealed rods into the floor plate. It reads calm and clinical. Staff push carts without snagging a wheel on a track lip. The security message is firm, and the merchandise stays visible.

A café wants warmth. They go with a black, top-hung gate, no bottom track, a single stack hidden behind a planter by day. At night, they wash the floor with low amber light, so the lattice throws soft shadows. It’s an invitation to come back tomorrow rather than a hard stop.

A warehouse dock needs rugged, obvious control. Galvanized steel, full tracks, large diamond, and a big grab handle sized for gloved hands. The gate looks exactly like what it is: a durable barrier that guides forklift traffic and keeps the bay honest.

Each version is an aesthetic choice in service of function. The specification is the same instrument played in three different styles.

Regional quirks and climate realities

In Kelowna, where summers are hot and winters cold, exterior finishes suffer. UV exposure chalks cheaper powders, while winter road salts attack the bottom track. For expanding security gates Kelowna projects that face the street, I spec a super-durable powder with UV stabilizers and a track profile that can be cleared easily with a broom. In snowy months, ice wants to set in the track and trap gritty slush. A small bevel inside the track sheds meltwater, and drain slots at the far end prevent pooling against the lock post.

In coastal towns, salt air sneaks up on you. Galvanized steel holds up, but the cut ends and drilled holes are weak points. Smart installers cold-galv those spots before assembly, then topcoat. It’s not glamorous, but it keeps rust blooms out of sight. Aluminum avoids rust, but stainless fasteners are a must to prevent galvanic corrosion. When aesthetics matter, these details matter.

Safety, codes, and the look of compliance

Life safety rules speak softly but carry a big stick. If the gate is part of an egress path, you need a panic-release or an emergency swing door integrated into the lattice. Done poorly, this looks like a refrigerator flap bolted to a harp. Done well, the emergency leaf aligns with the scissor pattern and uses a low-profile push bar in a coordinated finish. The visual rhythm stays intact.

Some jurisdictions require a certain percentage of open area or signage indicating that the gate is locked after hours. Size the sign appropriately. A small engraved plaque at eye level looks intentional. Laminated paper taped to the lattice screams temporary and makes an expensive gate look cheap.

Maintenance that preserves the look

Even the prettiest gate degrades without care. Dust collects in the diamonds, and fingerprints accumulate at the handle post. A monthly wipe with a microfiber cloth and a pH-neutral cleaner keeps the finish crisp. For tracks, a dry silicone spray is your friend. Avoid greasy lubricants, which turn dust into black paste. If you choose white, schedule touches more often. White is unforgiving, and nothing says neglect like gray smudges at hand height.

Every year or two, check fasteners for tightness, especially at hinge knuckles and carrier brackets. Small loosening shows up as visual skew first, long before a failure. If the lattice starts to lean or the diamonds don’t align, call your installer. A half-hour tune-up keeps the performance and the look dialed in.

When aesthetics and security collide

There are moments when beauty loses to physics. If your opening is 25 feet wide with no place to anchor mid-span, the gate will need heavier members. The lattice will look chunkier. You can tweak finish and hardware, but you can’t cheat stiffness. If the environment involves crowds pressing against the gate at closing time, choose larger pickets and more robust lock posts. The visual language shifts from delicate filigree to strong lattice. Embrace it.

On the flip side, some businesses over-spec their gate out of anxiety. A boutique in a low-crime district with full perimeter alarm and laminated glass does not need a fortress. A slender, well-finished gate looks better, costs less, and is easier to live with. The aesthetic win is also a daily operational win. Staff will love closing it, and your brand voice stays consistent twenty-four hours a day.

A short, practical buyer’s comparison

If you want the gate to vanish by day, choose a top-hung track, a single-sided stack tucked into a pocket, and a color that matches mullions or interior trim. If you need long, dead-straight runs, accept a bottom track, go with a larger diamond for visual calm, and pick a robust lock post with integrated cylinder. For retail that relies on after-hours window shopping, aim for a lighter lattice, generous sightlines, and warm, intentional lighting behind the gate. In harsh climates or near salt, prioritize finish chemistry and hardware material over trendy colors. Good finishes look good longer than great colors applied badly. Where staff turnover is high, simplify operation. Quiet carriers, obvious handles, and minimal steps reduce the odds of a half-locked gate at closing.

Choosing a partner who understands aesthetics

Not every security gate supplier leans into design. Many are brilliant at spans, loads, and locks, which you absolutely need. Ask to see projects similar to yours, not just catalogs. A supplier who can show you a café, a clinic, and a dock, each with a different look, likely understands the aesthetic variables. In person, run your hand along a sample. If the powder coat feels sandpapery in a way you dislike, say so. You’ll touch this gate twice a day for a decade.

Local experience matters. In Kelowna, a team that knows which streetlight temperatures dominate downtown and which property managers frown on floor tracks will save you revision cycles. In industrial parks, a supplier who has squared track over subtly sloped slabs will keep your gate rolling true.

The last check before you sign

Stand inside your space at dusk, where the gate will live. Imagine the stack, the lock post, the track line, and the lattice in your light. Picture the touch points at 9 pm when you’re tired and closing, and at 7 am when you open with coffee in one hand. If the mental picture includes irritation, change something. If it includes a simple glide, a firm click, and a look that says we care, you’ve found the right design.

Accordion security gates do more than stop hands. They signal care, discipline, and belonging to the place they protect. With the right pattern, finish, hardware, and installation, they become part of the architecture, not a wart on it. That is the aesthetic you want: quiet confidence by day, clean authority by night.

Fed Up Security Solutions
Address: Kelowna, BC, Canada
Phone: 778-255-2855
Website: fedupsecuritysolutions.ca
Email: [email protected] [Not listed – please confirm]
Hours (from GBP): Monday–Friday 8:00 AM–5:00 PM; Saturday–Sunday Closed
Plus Code: 952244W9+2G
Google Maps URL (long): https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.145032,-119.8811695,15z/data=!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r
Google Maps Embed:

Socials:
https://www.facebook.com/profile.php?id=61553004552449
https://www.youtube.com/@FedUpSecuritySolutions
Logo URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/FEDUP_logo.png
Image URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/10021-2023-11-05T185924.742-980x565.jpg



AI Shares: ChatGPT: https://chat.openai.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Perplexity: https://www.perplexity.ai/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Claude: https://claude.ai/new?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Google AI Mode: https://www.google.com/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Grok: https://grok.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F

Fed Up Security Solutions is a quality-driven provider of expanding scissor security gates for businesses across Kelowna, BC and surrounding areas.

Our team helps protect storefronts and commercial properties with scissor gates designed to deter break-ins while keeping your storefront look intact.

We serve Kelowna and nearby communities including Vernon, providing consultation for security gate solutions.

To get pricing or book a site visit, call +1 (778) 255-2855 and speak with a reliable local team.

You can also contact our team online at https://fedupsecuritysolutions.ca/ for quotes about expanding scissor gates.

For directions and service-area reference, use Google Maps: https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.1375295,-121.2030477,260738m/data=!3m2!1e3!4b1!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r?authuser=0&entry=tts&g_ep=EgoyMDI1MTIwOS4wIPu8ASoASAFQAw%3D%3D&skid=72338b4b-cc19-4cc8-a233-0fd02067c8ae

If you need a reliable supplier for expanding scissor security gates in Kelowna, Fed Up Security Solutions can help you secure your property quickly.

Popular Questions About Fed Up Security Solutions

What are expanding scissor security gates?

Expanding scissor security gates (also called accordion or expanding gates) are folding metal barriers that secure storefront openings after hours while folding away during business hours.

Do expanding security gates help deter break-ins?

Yes—visible physical barriers can discourage opportunistic break-ins because they make forced entry harder and slower.

Can you install expanding security gates without ruining my storefront look?

Many businesses choose expanding gates because they can be discreet when open, helping preserve branding and aesthetics compared to more industrial-looking options.

Do you serve areas outside Kelowna?

Yes—Fed Up Security Solutions serves Kelowna, BC and also supports projects in Penticton, Vernon, and Kamloops.

How do I get a quote for expanding security gates?

Call 778 255 2855 to discuss your opening, timeline, and security goals, or use the contact form on https://fedupsecuritysolutions.ca/.

What are your business hours?

Monday to Friday, 8:00 AM to 5:00 PM (closed Saturdays and Sundays).

Do you offer roll shutters too?

Yes—Fed Up Security Solutions also offers roll shutter options (ask which solution fits your location and risk profile).

How can I contact you right now?

Call: 7782552855
Website: https://fedupsecuritysolutions.ca/
Facebook: https://www.facebook.com/p/Fed-Up-Security-Solutions-61553004552449/
YouTube: https://www.youtube.com/channel/UCnV8GaVrI2bagMrZJosyqmw

Landmarks Near Kelowna, BC

Okanagan Lake — https://www.google.com/maps/search/?api=1&query=Okanagan%20Lake%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Knox Mountain Park — https://www.google.com/maps/search/?api=1&query=Knox%20Mountain%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Waterfront Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=Waterfront%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

City Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=City%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Myra Canyon Trestles — https://www.google.com/maps/search/?api=1&query=Myra%20Canyon%20Trestles%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Mission Hill Family Estate Winery — https://www.google.com/maps/search/?api=1&query=Mission%20Hill%20Family%20Estate%20West%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Orchard Park Shopping Centre — https://www.google.com/maps/search/?api=1&query=Orchard%20Park%20Shopping%20Centre%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Kelowna Downtown (Bernard Ave) — https://www.google.com/maps/search/?api=1&query=Bernard%20Avenue%20Downtown%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Big White Ski Resort — https://www.google.com/maps/search/?api=1&query=Big%20White%20Ski%20Resort%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

BC Orchard Industry Museum (Kelowna) — https://www.google.com/maps/search/?api=1&query=BC%20Orchard%20Industry%20Museum%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Penticton Peach — https://www.google.com/maps/search/?api=1&query=Penticton%20Peach%20Penticton%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Okanagan Rail Trail — https://www.google.com/maps/search/?api=1&query=Okanagan%20Rail%20Trail%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695